Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Opener Installation Cost in Hollywood?
Garage door opener installation in Hollywood typically costs $250 – $550, covering the unit, the mounting, the wiring, the sensor alignment, and testing. A straightforward chain-drive swap for a single-car garage usually lands near the low end at $250 – $350, while a belt-drive or smart opener with a battery backup on a double door in a home around Emerald Hills or Hollywood Hills runs closer to $450 – $550. We give you an upfront, all-in number before we start, so the price you hear is the price you pay.
Opener Installation Cost Breakdown (2026)
Here’s how the money actually splits on a Hollywood install. The opener unit is the biggest single line, but labor, the safety sensor work, and hauling away the old motor all add up.
| Line Item | Typical 2026 Range |
|---|---|
| Chain-drive opener (unit + install, single door) | $250 – $350 |
| Belt-drive opener (quieter, unit + install) | $320 – $450 |
| Smart / Wi-Fi opener with battery backup | $400 – $550 |
| Double-door or heavy insulated door upgrade | add $60 – $150 |
| New wall control + safety sensor wiring | $40 – $110 |
| Remove and haul away old opener | $30 – $70 |
| Reinforcing a sagging or worn opener rail | $50 – $130 |
Opener installation is our dedicated specialty, not a side job squeezed in between unrelated handyman calls, so the quote reflects real diagnostic work rather than a guess. The thing that pushes a Hollywood install toward the top of the range is almost always the door itself, not the motor. A heavy Clopay or Amarr insulated door needs a stronger unit and a properly braced rail. If we open the ceiling and find old wiring or a header that’s been patched over, that adds time. And if the door’s balance is off, we correct it during install so the new opener isn’t fighting a door that wants to drop. Where the line runs from your panel to the motor matters too; a long pull through an attic can add a little labor. We put all of this in the written quote so there are no surprises the day of the job.
What Affects Opener Installation Pricing in Hollywood
Two houses on the same block can price differently for reasons that have nothing to do with the brand name on the box.
- Opener type and drive style. Chain-drive is the budget pick and the loudest. Belt-drive runs quieter, which matters in Hollywood homes where the garage sits under a bedroom. Jackshaft and smart units with app control and battery backup sit at the top. The jump from chain to belt alone is usually $70 – $100.
- Door weight and condition. A single-car door is lighter work than a double. An insulated door or one with a broken spring puts more strain on the opener, so the rail, brackets, and mounting have to be set up for it. In older Hollywood neighborhoods, plenty of doors run on original hardware from decades past and need a balance check first.
- Safety sensor and wiring runs. Every install needs working safety sensors and the low-voltage wiring that connects them. If the old wire is brittle from years of salt air and sun, we replace it. That’s a small line item but a common one this close to the coast.
- Ceiling height and mounting. Standard 7-foot ceilings and open rafters make for an easy mount. Low ceilings, finished drywall, or a tight crawlspace to the header call for drop brackets and extra time.
- Removing the old unit. Hauling off a dead motor and its rail is a real task, and some quotes skip it. We include it.
- Brand and model you already own. We work on the eight brands most Hollywood garages actually have: LiftMaster, Chamberlain, Genie, Craftsman, Raynor, Clopay, Amarr, and Wayne Dalton. If you want to keep an existing remote or keypad working with the new motor, tell us up front; matching a compatible unit can save you from buying new remotes.
One habit we’ve built over years in South Florida: we test the door’s balance and travel before the new unit goes up. If the door won’t stay halfway open on its own, the springs are tired. Installing a fresh opener on an unbalanced door is the fastest way to burn out a motor, and we won’t do it. We’d rather tell you the springs need attention and quote both so you decide with the full picture. That’s the difference between a parts-swapper and a technician who knows what the opener is actually asking for.
How to Save on Opener Installation
The cheapest install is the one done right the first time, but there are real ways to trim the bill without cutting corners.
- Get a free written estimate first. We’ll look at your door, check the balance, and give you a firm number before any work starts. Call (833) 589-8106 to set that up.
- Match the opener to the door. A heavyweight double door needs a drive system that can lift it. Buying a cheap unit for a heavy door means it dies early and you pay twice. We’ll tell you the lowest-cost unit that’s actually right for your door.
- Fix the door before the opener if it’s overdue. If the springs are worn or a roller is shot, handle it before install. A new opener working against a tired door wears out faster than it should.
- Keep your existing remotes and keypad when they’re compatible. Not every new unit needs new gear. Ask what can carry over.
- Time a replacement instead of a breakdown. When a unit fails at 7 a.m. on a workday, the choice narrows fast. Planning the install ahead lets you pick the right unit on your schedule instead of grabbing whatever’s in stock.
If your current opener is giving you trouble but might still have life in it, a repair can be the smarter spend before you commit to a full replacement. We diagnose it honestly and tell you which way makes sense for your door.
FAQs – Opener Installation Cost
Is it cheaper to repair or replace my garage door opener in Hollywood?
Repair usually runs $120 – $320 and replacement runs $250 – $550, so repair wins when the problem is a single part like a gear, logic board, or sensor. If the motor’s weak, the unit is old, or a repair approaches half the cost of a new one, replacement is the better spend. We diagnose it and tell you which way the math points. Call (833) 589-8106 and we’ll give you a straight answer.
How much does a new garage door opener with installation cost in Hollywood?
Plan on $250 – $550 for the unit and installation together. A single-car chain-drive lands near $250 – $350, while a belt-drive or smart unit with battery backup on a double door can reach $450 – $550. The door’s weight and ceiling setup move that number more than the brand does. Call (833) 589-8106 for an exact free quote.
Can you install a garage door opener the same day?
Often, yes. A standard single or double-car install is typically a few hours of work, and we can usually fit same-day or next-day service depending on the part and schedule. When your opener quits on a work morning and the car’s pinned behind the door, that timing matters. Call (833) 589-8106 and we’ll tell you what’s realistic for today.
Do I need a new opener or can you just fix mine?
Many openers that seem dead need only a $120 – $320 repair. Sensors knocked out of alignment, worn gears, and failing remote receivers are all fixable. If the motor still runs clean and the unit isn’t ancient, repair is usually the right call. We’ll check before we recommend replacing anything. Call (833) 589-8106 to book a diagnosis.
How much does installed opener replacement cost if I already own a newer unit?
If you have a newer unit and just need it installed, the labor-only portion typically falls in the $150 – $300 range, depending on the rail, ceiling, and wiring situation. The unit you own has to be compatible with your door’s weight and the existing safety sensors. We’ll confirm that first. Call (833) 589-8106 to check yours.
Why Hollywood Homeowners Call Bright Star for Opener Work
We service the eight brands that fill Hollywood garages: LiftMaster, Chamberlain, Genie, Craftsman, Raynor, Clopay, Amarr, and Wayne Dalton. That covers everything from entry-level chain drives to premium insulated doors, so you don’t have to find a different company based on what you already own. Opener repair is listed as its own service line, which means our people are trained on opener electronics, sensors, and drive systems rather than treating them as an afterthought. And when a door is past saving, we can take you from broken to brand-new under the same roof: repair, opener work, and full installation all live with us. One company, start to finish.
For a garage door that won’t open at all or a door that needs more than a motor, our home page walks through the full range of what we handle across Hollywood and the surrounding neighborhoods, from Cooper City to Dania Beach.
We’re a garage door specialist, full stop. Not a generalist handyman who shows up to your door between other jobs. That single-trade focus is why we can name the model, the part, and the fix without guessing. For a closer look at how these installs work in our area, see our page on Opener Installation in Hollywood.
Get Your Free Opener Installation Estimate
The price you pay for a new opener in Hollywood depends on your door, your ceiling, and what you choose to install, and the best way to pin that down is a quick look. We give free, written estimates with the full number spelled out before we touch a tool, and no pressure to decide on the spot. Tell us the brand you have and the door it’s lifting, and we’ll tell you what fits and what it costs. Call (833) 589-8106 today for your free estimate.
Pricing reflects the Hollywood market as of 2026. Bright Star Garage Door Repair offers free estimates – call (833) 589-8106.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Kelly Vaughn"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— Todd Parker"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Brooke Quinn